Disco Duro De 1tb Wd My Passport For Mac

ExFAT in Windows 10 Another easy way to format a drive to use is by using Windows' built-in Disk Management. For instructions on how to do this, please see the instructions below: • Right-click on Start, the Windows logo on the bottom-left of the screen, and click Disk Management. • In the Disk Management window, the lower pane will display a list of available drives. Identify the drive that needs to be partitioned and formatted, and make sure that all critical data on this drive has been backed up elsewhere.

BIRUGEAR Hard Shell Carrying Pouch Case for Western Digital My Passport 500GB, 1TB, 2TB, 3TB - More Portable External Hard Drives and 5inch GPS - Black. WD My Passport for Mac 1TB Portable External Hard Drive Storage USB 3.0 (WDBLUZ0010BSL-NESN) My Passport for Mac Portable Hard Drive – Rapid transit for your digital life. My Passport for Mac features an ultra-fast USB 3.0 interface for blazing-fast transfer rates.

Click on Next. • Assign a drive letter for the drive to have once the process is at an end. Windows will automatically assign one, but this may be changed if so desired. When ready, click on Next.

For Macintosh computers, the driver installation process should not require any user intervention. If there are issues with the drivers installing correctly, you will need to contact for help reinstalling drivers. • Make sure your computer is powered on and the operating system is fully loaded.

Click on Next. • Leave the size of the volume to be the maximum disk space so it has only one volume.

Add in the easy to use and understand software tools and WD has a good external for the masses who want big capacity without any headaches. Sure it's only USB 2.0, but for mass storage on the go, the 34.5MB/s reads and 28.5MB/s writes get the job done for most people. Overall we were very pleased with the design and capacity improvements between this and the previous generation My Passport for Mac. Bottom Line The new Western Digital My Passport for Mac gives users up to 1TB of storage space wrapped in an attractive two-tone silver and black case with a USB 2.0 interface for wide compatibility.

While not as fast as eSATA or FireWire 800, it can still transfer photos, movies, and documents without musch hassle. We measured peak sequential transfers speed of 34.5MB/s read and 28.5MB/s write using CrystalDiskMark, which is close to the upper-range of USB 2.0 capabilities. Software WD includes two simple software packages with the My Passort for Mac. WD Drive Utilities handles diagnostics and other drive management duties. Users can run three drive tests ranging for a simple check of SMART data to a more robust full media scan that checks for bad sectors on the drive. Users can also manage the sleep settings for the drive, from never to 10, 15, 30 and 45 minutes.

Tengo recientemente un disco My Passport de 2TB (WDBY8L0020BBK) que venia con formato FAT32 pero constantemente me estaba dando este error The drive is not ready for use; its door may be open. Please check Procedi a formatearlo segun el instructivo de WD en formato NTFS. Se creo y formateo la perimera particion de 1TB pero mando un error, posteriormente intente formatear la particion extendida y el programa mando un error solicitando rebootear el equipo Procedi a hacerlo y a partir de entonces el disco no es reconocido. En el administrador de dispositivos si aparece, pero no esta accesible para ninguna tareaincluso las herramientas de WD no lo detectan Mi OS es Windows XP SP3 El disco venia sin software instalado AYUDA por favor.

September 22nd, 2011 by Kevin OBrien Western Digital My Passport for Mac Review (1TB) Western Digital completely redesigned and increased the capacity on both their My Passport for Mac and portable hard drives. Besides the new look, the latest models increase the capacities offered, upping the previous cap at 500GB to 750GB and 1TB. In this review we take a look at the more affordable 1TB My Passport for Mac, which offers a stylish all-plastic case and a USB 2.0 interface with the price listed at $129. WD My Passport for Mac Specs • Interface - USB 2.0 • Capacity • 500GB - WDBL1D5000ABK • 750GB - WDBBXV7500ABK • 1TB - WDBBXV0010BBK • Height 0.60 Inches, Length 4.35 Inches, Width 3.23 Inches • Weight 0.31 Pounds • Operating 41° F to 95° F • Non-operating -4° F to 149° F • Formatted HFS+ Journaled • No external power required Build and Design The new My Passport for Mac changes the design slightly from the previous model, with the most noteable difference being the new color scheme which is designed to match the aluminum-bodied MacBook-line from Apple. The case on the My Passport for Mac is plastic versus aluminum on the My Passport Studio, which adds some layer of cost savings as well as makes this particular model lighter than the other offering. The color scheme is two-tone with a black border and bottom half, with a brushed-metal appearance top cover.

FAT32 in macOS 10.11 (El Capitan) and macOS 10.12 (Sierra) The easiest way to format a drive to use is by using Mac OSX's built-in Disk Utility. For instructions on how to do this, please see the instructions below: • Begin by connecting the WD drive to the Mac computer. • Once that's done, double left-click on the Mac HD, the internal Mac hard drive visible on the top-right corner of the desktop screen. Choose Applications from the left-side panel. While in there, open Utilities, and lastly double-click on Disk Utility • When Disk Utility opens, all available drives will display on the left-side panel. • From said list, select the drive that is to be partitioned and formatted from the left-side panel. Typically there are two listings for each drive, unless there is more than one partition on a particular drive.

The back of the drive contains one USB 2.0 port and an LED activity light. The USB port is actually a Micro-USB connection on the drive, a nice touch since most users have done away with dated mini-USB cords. It's a small thing for sure, but we still see new drives released with old interface designs. The bottom of the drive is all-black, with black rubber feet and a product information label which includes important information such as the model number and serial number.

El Capitan Osx - como instalar Wester Digital my Passport for mac and pc windows, Western Digital 100gb 200gb 300gb 400gb 500gb 1tb, 2tb, 3tb, 4tb, 5tb, 6tb 7tb 8tb 9b 10tb 20tb, 40gb 50gb 60gb 70gb 80gb 90gb. Usb 3.0, usb 2.0, usb 4.0,WD Elements, WD My Book western digital, my passport wd, we my cloud,wd my passport ultra, How to format so its compatible with Windows y Mac OSX, Format External hard Drive journaled or exfat? Time machine Macbook Pro, iMac, macbook air, laptop mac, desktop, computer apple, macbook retina display, macbook air, mac mini, mac pro, Yosemite OS X, Mavericks OS X, tiger OS X. Download scribblenauts unlimited free mac. Installation, no cd needed, no drivers needed black, silver, grey, white hard drive, portable hard drive, metal edition, titanium, blue, red, my book duo, metallic silver, thunderbolt, Western Digital manual.

This may take several minutes. Note: If an error message is received stating that the drive is unable to be unmounted, this means that there is a program or service currently reading or writing data on the drive. Determine what program is accessing the drive and shut it down before trying to format the drive again. If the error message persists, restarting the computer may resolve the issue. If additional assistance is required, please. • When finished, the drive will be formatted and repartitioned successfully.

Click on Done. ExFAT in macOS 10.10 (Yosemite) and earlier One of the easiest ways to format a drive to use is by using Mac OSX's built-in Disk Utility. For instructions on how to do this, please see the instructions below: • Begin by connecting the WD drive to the Mac computer.

Most WD Drives come formatted in the NTFS (Windows) or HFS+ (Mac) format. For a hard drive to be able to be read and written to in both a PC and Mac computer, it must be formatted to or file format. FAT32 has several limitations, including a 4 GB per-file limit. This is a file system limitation that affects both Mac's and PC's, and the only workaround is to format the drive to exFAT. For more information about what these limitations are please see. The easiest way to format the drive to or is by using macOS's built-in Disk Utility or Windows' built-in Disk Management.

• Once the drive appears on the desktop, click on Go on the top tool bar. From the drop-down menu, click on Utilities.

When done, begin the New Simple Volume process again and select the remaining capacity, the unallocated space, for another 1TB partition. • Assign a drive letter to represent the volume being created, and click Next. By default, this is the next available letter. • Next is the File System, which controls how the data is read and written.

This answer explains how to format a drive in the exFAT or FAT32 file system. This allows the drive to be used on both Windows and macOS.*END A Western Digital external hard drive can be used on both Windows and Mac OSX. This is useful if a drive is being used under both to move files between the two environments.

Please see the following article on how to format a drive to FAT32 using Acronis True Image WD Edition:. Using Third-Party Software (For newer (made after 2007) external hard drives) As Windows is unable to format a drive over 32 GB in FAT32, the use of third-party software is required. Western Digital cannot assist in acquiring or using third-party software to format a drive as FAT32.

When it is done, this bar will go away and the drive should now be listed on the desktop. FAT32 in Windows 10 and earlier Important: Windows 10, 8, 7, Vista, and XP can only (using the actual operating system itself) create FAT32 partitions that are 32 GB or smaller. In order to format a drive larger than 32 GB using Windows OS, additional software may be required. Western Digital provides the software that allows users of our internal hard drives to format their drives. Users of our external drives will need to find third-party software to accomplish this task. Using Acronis True Image WD Edition for Windows (For Western Digital internal hard drives) Acronis True Image WD Edition can format any capacity internal single drive unit made by Western Digital.

Set the file system to exFAT, which is the default Windows file system, and leave the Allocation unit size to Default. The Volume Label field can be customized in order to give the volume a desired name, such as My Book or WD Black 1. Check the box labeled Perform a quick format and click Next. • Click Finish to begin formatting the drive. • When complete, the drive will appear with a blue bar as in the image below. ExFAT in Windows 8 and earlier Another easy way to format a drive to use is by using Windows' built-in Disk Management. For instructions on how to do this, please see the instructions below: • Open Disk Management.

It is usually directly above the name of the drive. In the example below, the one to be selected would be WD My Passport 07BA Media. Erase• After selecting the appropriate drive, additional options will become available on the top part of the Disk Utility window. Click on Erase. • The Erase window will now appear. Assign the name that will be given to the drive, and click on Erase.

Typically there are two listings for each drive, unless there is more than one partition on a particular drive. Choose the drive listing that is farthest to the left for the drive that will be formatted. It is usually directly above the name of the drive, and is the drive selection that has the total size of the drive being displayed. Once selected, click on Partition on the right-side area. • In the Partition area, click under Partition Layout and select 1 Partition. Then, click on Options. • In the Options window select Master Boot Record and then click Ok.

If there is already a partition on the drive, the bar above that drive will appear blue. If there is no critical data on the drive, or the data has been successfully backed up, right-click the bar and click Delete Volume. Important: If Disk Management shows the drive as Not Initialized, the drive will have to be initialized. For assistance initializing a hard drive, please see. • If there is no partition and data on the drive, it will appear as Unallocated, with a black bar on top. Right-click the Unallocated space or the black bar, and click New Simple Volume. • The Welcome to the New Simple Volume Wizard will open.

Critical: Never attempt to connect any external drive to multiple computers at the same time. This could quickly damage the drive's partition and corrupt the data on the drive. ExFAT in macOS 10.11 (El Capitan) and macOS 10.12 (Sierra) There are two easy ways to format a drive to use is by using Mac OSX's built-in Disk Utility; using Erase (Step 4) or Partition (Step 7). For instructions on how to do this, please see the instructions below: • Connect the WD drive to the Mac computer. • Double left-click on the Mac HD, the internal Mac hard drive visible on the top-right corner of the desktop screen. Choose Applications from the left-side panel. While in there, open Utilities, and lastly double-click on Disk Utility.

WD includes a drive erase function and a simple product registration form with three form fields to complete. The other included application is WD Security, which lets users specify a password required to access the data on the drive; this is especially handy for portable drives. Also handy is the bright red warning from WD, 'WD cannot retrieve your password. If you forget your password, you will permanently lose access to your data.' Once you accept the warning with the check box and remember to specify a hint, you can also enable auto unlock for the drive to prevent having to enter the password every time the drive is connected. Conclusion The MSRP of $130 for the 1TB My Passport for Mac is barely more than the bare drive would cost on its own, making the value pretty darn good for this external hard drive. The case is well made and actually looks better than we expected for an all plastic effort - you'd think it's metal until you hold it.

• Disk Utility will now be open. In the left-side pane, choose the drive that is to be partitioned and formatted. Typically there are two listings for each drive unless more than one partition exists on a particular drive. Choose the drive listing that is farthest to the left for the drive that will be formatted.

• Connect the supplied USB cable (or FireWire cable if you have the My Passport Studio) to the Passport drive. • Connect the Passport drive to your computer with the USB/FireWire cable. (The picture below shows how to plug the drive into your computer.) Note: In most cases, a separate power supply will not be needed with this product, as it is USB/FireWire powered. • The Passport drive should mount to the desktop as a new icon.

Vlc media download for windows xp. Using the FAT32 Formatter for older WD drives Western Digital has a Windows based utility that will reformat an older Western Digital external USB or FireWire hard drive back to the factory default FAT32 partition. The FAT32 formatter software is only for older external single drive units and can only format a drive that is 1TB and below. It will not work on an external drive that is greater than 1TB in size. It also may not work on models released after 2007. When run, this utility can only create a single FAT32 partition for the full capacity of the hard drive. Please follow the directions below to download and use the Western Digital FAT32 formatting utility.

For setup questions beyond physical installation of your Western Digital hard drive, please contact your Linux/Unix vendor. You may also wish to post on our for assistance from other users of our products who may be able to assist you with your issue. In case the answer did not answer your question, you can always visit the for help from WD users.

Click Next to proceed. • Choose the volume size and click Next. By default, the maximum disk space is already selected and it is recommended to leave it at the maximum disk space. Note: To create multiple partitions, select or type a specific number of megabytes (MB) for the first partition and continue to the next step. Once done with this process, the remaining space will display as unallocated space. Now, create another New Simple Volume in the remaining unallocated space for the next partition. For example, on a 2TB drive, set the volume size to 1000000 (1 TB) and continue to the next step.

In Windows 8 this can be achieved by moving the mouse to the bottom-left corner of the Desktop and right-clicking on top of the Start menu screen. Important: On Windows 7, Vista, or XP, instead click on Start, right-click on top of Computer and click on Manage. Then, click Disk Management right below Storage. • From the menu, click on Disk Management. Note: On other versions of Windows, Disk Management can be accessed through Control Panel, going to System > Administrative Tools > Computer Management. • Disk Management will display the various disks that are available in that system.